MOLDS & TOOLING

Molds and tooling for plastics production are used in all processes to give the melted plastic its final shape. Includes molds, mold components, ejector pins, mold bases, nozzles, mold cores, mold cavities, mold texturing, laser marking.

Why Shoulder Bolts Are Too Important to Ignore (Part 1)

These humble but essential fasteners used in injection molds are known by various names and used for a number of purposes.

Molds & Tooling: Essential Reading

How to Achieve Simulation Success, Part 1: Model Accuracy and Mesh Decisions

Molding simulation software is a powerful tool, but what you get out of it depends very much on your initial inputs. Follow these tips to create the most successful simulation possible.

The Impact of Hydraulics on Tool Design, Practical Uses -- Part 2 of 2

Here are more tips on using hydraulically actuated devices on your tools.

The Impact of Hydraulics on Tool Design -- Part 1 of 2

Get a better understanding of their use, proper sizing, and how the tool design and setup in the machine can impact failures in manufacturing.

How to Select the Right Tool Steel for Mold Cavities

With cavity steel or alloy selection there are many variables that can dictate the best option.

How to Optimize Pack & Hold Times for Hot-Runner & Valve-Gated Molds

Applying a scientific method to what is typically a trial-and-error process. Part 2 of 2.

image

FAQ: Molds & Tooling

 

Leader pins are often referred to as guide pins. They lead or guide one-half of a mold into the other. The outer diameter of a leader pin is typically 0.0010 in. below nominal with a tolerance of +0.0000/-0.0005 in. A leader-pin bushing typically has an inside diameter of 0.0005 in. above nominal with a tolerance of +0.0005/-0.0000. Therefore, the pin has a close sliding fit in its mating bushing with a clearance of between 0.0015 and 0.0025 in. total. A close sliding fit is intended for the accurate location of parts that must assemble without perceptible play. 

 

image

Molds & Tooling Suppliers